L ad L C 4 Channel 0-10v Fluorescent Dimmer Technical Data The DS4xFLU is a 4 channel, 0-10volt, analogue output dimmer, designed to drive (0-10v) Supply 230vac 50/60Hz Operating Temp 0 - 40 degC Ambient fluorescent lamp ballasts. Each channel has it's own high inrush power relay rated at 10amps Outputs 4 x 0 - 10vdc Enclosure Powder Coated Steel to provide switched mains power to the ballasts (or to a contactor where there are a large number of ballasts). This module is also well suited to driving 0-10v LED Transformers. When Relays 4 x 10amp 100A Inrush Dimensions 220 x 160 x 70 mm used in conjunction with control plates from the Hyrax range, a scene based lighting control EMC R-C Suppression Suitable Loads High Frequency 0-10v system with infra-red capability can be constructed to suit installations both large and small. Fluorescent Ballasts The control plates are connected to the dimmer using low voltage CAT5 style cable and data Dimming Control 0 - 10v Analogue communication is supported by the Hy-Net protocol, which is a proven robust interface with an Cable Entries 4x 20mm, 1 x16mm 0-10v LED integral watchdog facility. The DS range of dimmers has the advantage of having individual DIP Transformers switches per channel which dramatically reduces the need for laptop configuration. Low Voltage Out 5vdc 100ma Control Input Hy-Net Serial Data DMX 512 Available Option Internal Controls 4 x Zone-Chan DIP Switch Product Code Description Indicators Power & Diagnostic LEDs LUDS4XFLU 4 Channel 0-10v Fluorescent Dimmer ! ! # " 49
Warwick Electrical Product Guide
To see the actual publication please follow the link above